330 Configuring SNMP
/cfg/sys/adm/snmp/users <user ID>
followed by:
seclevel none|auth|priv Specifiesthe degree of SNMP USM
security. Valid options are:
•none—SNMP access is granted
without authentication.
•auth—the SNMP user must provide a
verified password before SNMP access
is granted. You are later prompted to
specify the required password (auth
password). SNMP information is
transmitted in plain text.
•priv—the SNMP user must provide a
verified password before SNMP access
is granted, and all SNMP information
is encrypted with the user’s individual
key. You are later prompted to specify
the required password (auth password)
and encryption key (priv password).
The default is priv.
permission get|set|trap Specifiesthe USM user’s privileges. Valid
options are:
•get—USM user is authorized to
perform SNMP get requests (read
access to the MIB).
•set—USM user is authorized to
perform SNMP set requests (write
access to the MIB). Write access
automatically implies read access as
well.
•trap—USM user is authorized to
receive trap event messages and alarm
messages.
Enter the desired permissions, separated
by a comma (,).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.