Managing private keys and certificates 313
bIn a text editor, open the key file.
cCopy the entire contents, including the -----BEGIN
RSA PRIVATE KEY----- and -----END RSA PRIVATE
KEY----- lines.
3Add the private key.
aEnter the following command:
/cfg/cert #/key
bPaste the contents of the key file at the command prompt.
cPress Enter to create a new line, and then enter an ellipsis
(...) to terminate.
dIf the key is password protected, you are prompted to enter
the password phrase. The password phrase required is the
one you specified when saving or exporting the private key.
4Apply the changes.
The certificate and private key are now fully installed.
Figure 17 "Adding a private key by pasting" (page 314) shows
sample output for the /cfg/cert #/key command. For
more information about the Certificate menu commands, see
“Managing and viewing certificates and keys” (page 302).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.