90 Configuring the domain
Table 4
Configuring domain parameters
/cfg/domain <domain ID>
followed by:
name<name> Names or renames the domain.
•name is a string that must be unique in the
domain. The maximum length of the string
is 255 characters.
The name is a mnemonic aid only and is not
used by other functions.
pvips <IPaddr> Sets the pVIP for the domain. The pVIP is the
portal address to which clients connect in order
to access the Nortel SNAS network. For more
information, see “About the IP addresses”
(page 42).
A domain can have more than one pVIP. To
configure multiple IP addresses for the portal,
use a comma to separate the IP address
entries.
aaa Accesses the AAA menu, in order to configure
authentication, authorization, and accounting
features.
•For authentication, see “Configuring
authentication” (page 171).
•For authorization, see “Configuring groups
and profiles” (page 149) and .“Configuring
the Nortel Health Agent check” (page 92)
•For accounting, see “Configuring RADIUS
accounting” (page 110).
location Accesses the Location menu for the location
based security. (see “Creation of the location”
(page 123))
patchlink Accesses the PatchLink Servers menu. (see
“Configuring Lumension PatchLink integration
” (page 124))
server Accesses the Server menu, in order
to configure the portal SSL server (see
“Configuring the SSL server” (page 97)).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.