Nortel Networks Settings created by the quick setup wizard

Initial setup 49
C:\tunnelguard\tg.txt
Creating linkset ’nha_system_passed’.
Creating linkset ’nha_system_failed’.
Creating group ’nhauser’ with secure access.
Associating group ’nhasystem’ with srs rule
’srs-rule-syscred-test’.
Creating extended profile, full access when
nha_system_passed
Enter system green vlan id [115]: <VID>
Creating extended profile, remediation access when
nha_system_failed
Enter yellow vlan id [120]: <VID>
Creating system account ’nha’ in group ’nhasystem’.
Setting activation date to 2008 03 10 0:03.
Setting earliest push date to 2008 03 09 23:59.
Setting system credentials in group ’nhasystem’.
Would you like to enable the Nortel DesktopAgent?
[yes]:
Enabling Nortel Desktop Agent login on the captive
portal.
Enable secure web based configuration management
[yes]:
Enabling configuration management to https://192.168.
0.62:4443
Loading default radius dictionaries. Initializing
system......ok
Setup successful. Relogin to configure.
--End--
Settings created by the quick setup wizard
The quick setup wizard creates the following basic Nortel SNAS settings:
Step Action
1A Nortel SNAS domain (Doamin 1). A Nortel SNAS domain
encompasses all switches, authentication servers, and
remediation servers associated with the Nortel SNAS.
2A virtual SSL server. A portal IP address, or pVIP, is assigned to
the virtual SSL server. Clients connect to the pVIP in order to
access the portal.
3A test certificate is installed and mapped to the Nortel SNAS
portal.
4The authentication method is set to Local database.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.