102 Configuring the domain
/cfg/domain #/server/trace
followed by:
•host is the host name or IP address of the
target station
If a backend interface is mapped to the current
Nortel SNAS domain, the check is made
through the backend interface. To map a
backend interface to the domain, use the
/cfg/domain #/adv/interface command
(see “Configuring advanced settings” (page
109)).
To be able to use a host name, the DNS
parameters must be configured (see
“Configuring DNS servers and settings” (page
276)).

Configuring SSL settings

To configure SSL-specific settings for the portal server, use the following

command:
/cfg/domain #/server/ssl

The SSL Settings menu appears.

The SSL Settings menu includes the following options:

Table 8
Configuring SSL Settings
/cfg/domain #/server/ssl
followed by:
cert <certificate
index>
Specifies which server certificate the portal
server will use. You cannot specify more than
one server certificate for the server to use at
any one time.
•certificate index is an integer
indicating the index number automatically
assigned to the certificate when you created
it
To view basic information about available
certificates, use the /info/certs command.
For information about adding a new certificate,
see “Installing certificates and keys” (page 299).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007,2008 NortelNetworks
.