Nortel Networks 5520, 5530, 5510 manual Meters, Parameters and variables Description

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide	v2.0	NN48500-559

11.3 Meters

To add a meter, enter the following command:

•ERS5500-48T(config)#qos meter <1-64000> name <name> committed-rate <1000- 1023000 Kbit/sec> max-burst-rate <1-4294967295> max-burst-duration <1- 4294967295> in-profile-action <1-64000> out-profile-action <1-64000>

To view the action number, enter the following command:

ERS5500-48T(config)#show qos action

	Id	Name	Drop		Update	802.1p	Set Drop Extension	Storage
					DSCP	Priority	Precedence	Type
_____		________________ _____			______ ____________		___________ _________	_______
1		Drop_Traffic	Yes		Ignore Ignore		High Drop	ReadOnl
2		Standard_Service DPass			0x0	Priority 0	High Drop	ReadOnl
3		Bronze_Service	DPass		0xA	Priority 2	Low Drop	ReadOnl
4		Silver_Service	DPass		0x12	Priority 3	Low Drop	ReadOnl
5		Gold_Service	DPass		0x1A	Priority 4	Low Drop	ReadOnl
6		Platinum_Service DPass			0x22	Priority 5	Low Drop	ReadOnl
7		Premium_Service	DPass		0x2E	Priority 6	Low Drop	ReadOnl
8		Network_Service	DPass		0x30	Priority 7	Low Drop	ReadOnl
9		Null_Action	DPass		Ignore Ignore		Low Drop	ReadOnl
	64001 UntrustedClfrs1		DPass		Ing 1p Ignore		Low Drop	Other
	64002 UntrustedClfrs2		DPass		0x0	Priority 0	High Drop	Other
	QoS Meter Command Parameters
	Parameters and variables			Description
	<metid>			Enter an integer to specify the QoS meter; range is 1 to 64000.
	name <metname>			Specify name for meter; maximum is 16 alphanumeric characters.
	committed-rate <rate>			Specifies rate that traffic must not exceed for extended periods to
				be considered in-profile. Enter the rate in Kb/s for in-profile traffic
				in increments of 1000 Kbits/sec; range is 1000 to 1023000
				Kbits/sec.
	max-burst-rate <burstrate>			Specifies the largest burst of traffic that can be received a given
				time for the traffic to be considered in-profile. Used in calculating
				the committed burst size. Enter the burst size in Kb/s for in-profile
				traffic; range is 1 to 4294967295 Kbits/sec
	max-burst-duration			Specifies the amount of time that the largest burst of traffic that
	<burstdur>			can be received for the traffic to be considered in-profile. Used in
				calculating the committed burst size. Enter the burst duration in
				ms for in-profile traffic; range is 1 to 4294967295 ms.
	in-profile-action <actid>			Specify the in-profile action ID.
	in-profile-action-name			Specify the in-profile action name.
	<actname>
	out-profile-action <actid>			Specify the out-of-profile action ID.
	out-profile-action-name			Specify the out-of-profile action name.
	<actname>

___________________________________________________________________________________________________________________________

Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution	41