Nortel Networks 5510, 5520, 5530 - page 19

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide v2.0 NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
18
The qos queue-set-assignment queue-set <1-8> 1p <0-7> queue <1-8> command gives
the user the ability to specify the queue to associate an 802.1p priori ty. This command is
in the CLI priv-exec mode.
• 5520-24T-PWR(config)#default qos agent queue-set
The default qos agent queue-set command will default the egress CoS an d QoS queue
set. The default CoS/QoS queue mode is 8. This command is in the CLI priv-exec
mode.
• 5520-24T-PWR(config)#show qos agent
The show qos agent command displays the current attributes for egr ess CoS and QoS
queue mode, resource sharing mode and QoS NVRAM commit delay. T his command is
in the CLI priv-exec mode.
• 5520-24T-PWR(config)#qos agent nvram delay
The qos agent nvram delay command will modify the maximum time in sec onds to write
config data to non-volatile storage. This command is in the CLI pri v-exec mode.
• 5520-24T-PWR(config)#qos agent reset-default
The qos agent reset-default command resets QoS to its configuration def ault. This
command is in the CLI priv-exec mode.
Egress Queue Recommendations
If you are running all untagged traffic and do not change default port pr iority settings, use setting
1 CoS.