Omega Speaker Systems LCIC-WIM-BEN manual

3.3.2.3 Start Fill-mode

3.3.2.3.1Fill-mode starts automatically upon card reset

When this option is activated (checked), the card starts automatically the Fill-mode upon reset. Otherwise (the option is unchecked), the cards ‘awakes’ in the upper level, referred to in this document as the ‘general mode’.

Notes

1.In order to switch the card from Fill mode to General mode, use the ‘x’ command (small ‘x’).

2.In order to switch the card from General mode to Fill mode, use the ‘F’ command.

3.About the ‘x’, ‘F’ and other commands in Fill mode,

refer to section E.6.

27