Omega Speaker Systems LCIC-WIM-BEN manual Misc

i. Misc.:

	Manually zero the gross weight. The effect of this function
z (lower case z)	is temporary — it expires upon card reset.
	Response (versions 1.12, 3.09, 6.01, 7.00 and up):
	‘z’<c/r>.
Z (Upper case Z)	Cancel the manual zero operation (the lower case ‘z’).
(versions 1.12, 3.09,	That is, return to the original calibration zero.
6.01, 7.00 and up)	Response: ‘Z’<c/r>.
	System reset (software reset to perform a restart as if
	turned off/on).
	Response (versions 1.12, 3.09, 6.01, 7.00 and up):
	‘S’<c/r> - possibly followed by additional binary
	character(s).
S	Wait 6 seconds before accessing the board again.
(upper case S)	Issue this command after changing any of the following
	parameters:
	* Auto transmit interval (parameter #20).
	* Filters & Decimators (parameters #23-25).
	* General Setpoints (parameters #101-104).
	* Output modes (parameters #111-114).
F (upper case F)	Start Fill-mode.
	Get version no. of DSP software.
V (upper case V)	Board’s response: “LCIC-WIM/V#.##”, where
	#.## = Version Number.

32