3.3.1.1 Tools / Analog Output
The ‘Settings’ utility gives access to the analog output mechanism: Click ‘Tools’ / ‘Analog Output’.
For ‘manual’ mode uncheck the ‘Activate Auto Mode’ box. For ‘auto’ mode check the ‘Activate Auto Mode’ box.
Manual Mode
On the top of the display, specify a desired voltage in the ‘Manual Mode’ square and click ‘Send’.
Auto Mode
Specify the following parameters:
1.Voltage Max.
2.Weight Max.
3.Weight Min.
4.Update Frequency
The Auto Mode works like this:
*When the current weight = Weight Min. or less, the analog output is set to 0.
*When the current weight = Weight Max. or more, the analog output is set to Voltage Max.
*When the current weight is between Weight Min. and Weight
Max., the analog output is set between 0 and Voltage Max., in the same ratio.
*The rate of updating the analog output is depends on the Update Frequency parameter. For example, when Update Frequency is 4, the analog output is updated 4 times a second.
21
