Omega Speaker Systems LCIC-WIM-BEN manual Appendix F Specifications, Load Cell Input

Appendix F: Specifications

F.1 Load Cell Input

•5 Volt excitation for upto 10 load cells (350 Ohm)

•Compatible with 1, 2 & 3 mV/V load cells

•Low noise wide bandwidth amplifier & 24 bit ADC

F.2 A/D

•Very high speed A/D: upto 52,000 samples per second

•24 Bit A/D with ± 8 million counts for tension and compression applications

F.3 Digital Inputs

•4 opto-isolated inputs with 10-30 VDC range, each with status LED

•Input #2 configurable as high speed counter

F.4 Digital & Analog Outputs

•4 opto-isolated solid state relays rated at 50V, 300mA, each with status LED. Configurable as setpoints or manual outputs.

•Analog output of 0 to 2.5V with 16 bit resolution.

F.5 Standard Interfaces

•USB 2.0 Full Speed compatible

•Combined RS232/RS485

•Multiple boards may be connected via USB or RS232/RS485

•Ideal for PLC based applications

F.6 Software

•LCIC-WIM Calibration Wizard software is included.

•Included is the LCIC-WIM Monitor utility which is a vital tool for analyzing dynamic load/force systems. It takes full advantage of the board’s speed.

•Also included the LCIC-WIM-SETTINGS utility which gives control to card’s filters, analog output, filling parameters and other settings.

•An ActiveX interface is supplied for easier programming of user’s application; however, direct conversation with the board is available either.

F.7 Dimensions (mm)

•Standard OEM model 160 x 100pcb (Eurocard(

•ABS cased option

F.8 Misc.

•Powerful 32 bit / 135 MIPS DSP for high speed onboard processing.

•8 digit LED display

•On board temperature sensor

•Card includes an integral Fill Mode supplying an independent filling control.

80