LED Display | Omega Speaker Systems LCIC-WIM-BEN specs

A.4 The LED Display

Upon board restart, the two following messages are shown on the LED display – each for a while:

LCIC x.xx	x.xx is board’s DSP version.
Sb yyy	yyy is current board’s Serial baud-rate
	(refer to sections 3.3.1.2 & D.2).

Then the display shows the current data.

Notes

1.The weight on the LED display is always after Filter2 (refer to section 3.3.2.4).

2.In Fill-mode, the LED display shows additional information – refer to section E.5.

3.During the Fast Mode (section 4.3.4) the LED display is not updated.