Omega Speaker Systems LCIC-WIM-BEN manual Becomes effective only after a system reset either

	Filter1 value: 2-256.
23	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Filter2 value: 2-256.
24	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Decimator: 1-1000.
25	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	General Setpoint1.
101	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	General Setpoint2.
102	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	General Setpoint3.
103	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	General Setpoint4.
104	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Output1 Mode 0=manual, 1=general setpoint.
111	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Output2 Mode 0=manual, 1=general setpoint.
112	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Output3 Mode 0=manual, 1=general setpoint.
113	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Output4 Mode 0=manual, 1=general setpoint.
114	Becomes effective only after a system reset (either	Float
	power off/on or using the ‘S’ command).
	Baud rate for the RS232/RS485 port.
	Possible values:
115	19200, 28800, 38400, 57600, 115200.	Float
	Note
	The baud rate for the USB need not be defined –
	its upper limit is 921,600.

35