Omega Speaker Systems LCIC-WIM-BEN manual Baud Rate

D.2 Baud Rate

For the USB, the maximal baud rate is 921,600. The board responds well without a need to pre-define the used b/r.

For serial communication, the required b/r should be pre-defined by the user via the Settings utility (section 3.3). The available baud rates are between 19,200 and 115,200. The current b/r used by the board for the serial communication is shown for a while on the LED display upon card reset, prefixed by ‘Sb’ (=Serial baud rate). Refer also to sections 3.3.1.2 & 3.3.2.1.2.

D.3 General RS232 Terminal

You may talk with the card either by your own application or by a general RS232 terminal. One simple one called Termite is available for free at http://www.compuphase.com/software_termite.htm

D.4 Serial Communication & PC Power On/Off

After PC power on or off the serial communication (RS232/RS485) is likely to drop. A card reset is needed in this case.

56