Palm 680 manual Setting up your computer for a Bluetooth DUN connection

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S

5

6Select your computer from the Trusted Devices list, and then select OK.

7Make up a passkey, enter it on the Bluetooth Security screen, and then select OK. The passkey can be up to 16 numbers.

NOTE You need this passkey in the next step, so be sure to write it down exactly. We recommend that you use a passkey of 16 numbers, where possible, to improve the security of your Treo. The longer the passkey, the more difficult it is for the passkey to be deciphered.

8Enter the same passkey on your computer when prompted.

9Select Done, and then select Done again to return to the Bluetooth screen.

Setting up your computer for a Bluetooth DUN connection

Follow the instructions from the manufacturer of your Bluetooth adapter to enable DUN.

Accessing the Internet using a Bluetooth DUN connection

The steps for accessing the Internet on your computer may vary depending on your operating system and how Bluetooth wireless technology is set up on your computer—for example, if it is built-in versus if you are using a Bluetooth adapter. If you need additional info, check your computer’s documentation for how to set up Bluetooth technology to access the Internet using a DUN connection.

TIP You may need to use a virtual private network (VPN) to access corporate email. Check with your system administrator for more information.

BEFORE YOU BEGIN Verify that DUN is enabled on your computer. See the documentation that came with your computer for details.

1Open the Bluetooth application on your computer and let it locate the Treo you paired it with in the previous procedure.

C H A P T E R

119