Palm 680 manual Select Card Info, Formatting an expansion card

Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S

9

3Select Card Info .

4Press Menu .

5Select Rename Card from the Card menu.

6Enter a new name for the card.

7Select OK.

TIP If you have trouble copying info to, renaming, or formatting an expansion card, make sure the card is not write-protected. Press Applications and select Card Info. If a This card is read-only message appears, then the card is write-protected. If you’re using an SD card, you can slide the write-protect tab to the opposite position to write to the card. See the instructions that came with your card for additional info.

Formatting an expansion card

Formatting an expansion card is similar to formatting a disk on a computer. When you format an expansion card, you erase all the information stored on the card.

TIP If you format a card, any photos or documents that were previously stored on the card are deleted from your desktop software the next time you sync. You can recover these files from the backup folder, or you can prevent the deletion by temporarily changing your sync settings for the affected application to Desktop overwrites handheld.

1Insert the expansion card into the expansion card slot.

2Select the category pick list at the top of the screen and select All.

3Select Card Info .

4Press Menu .

5Select Format Card from the Card menu.

6Enter a new name for the card.

7Select OK.

C H A P T E R

189