Palm 680 manual Charging the battery

S E T T I N G U P

1

replacement batteries, see Replacing the battery.

7Slide the battery door onto the back of the smartphone until it clicks into place.

8Your Treo screen wakes up and begins the setup process. When the language selection screen appears, select the language you want to use, and then follow the onscreen instructions to set up your Treo.

TIP If your Treo does not turn on, you need to connect it to the AC charger. If it still does not turn on after being connected to the AC charger for five minutes, then do a soft reset. See Performing a soft reset.

IMPORTANT Always use the same language for your Treo, your computer operating system, and your desktop software. Otherwise, you may lose information or have difficulty with synchronization. Support is not provided for mismatched language setups.

TIP The power-saving feature turns off the Treo screen after a period of inactivity. To wake up the screen, press and release Power/End, and then press Center on the 5-way to turn off

Keyguard.

Charging the battery

The battery comes with a sufficient charge to complete the setup process and activate your phone. After activation, we recommend charging your smartphone for three hours (or until the indicator light is solid green) to give it a full charge. See Maximizing battery life for tips on maximizing the life of your Treo battery.

TIP To avoid draining the battery, charge your smartphone every day, especially if you use your phone often.

DID YOU KNOW? If your battery ever becomes fully drained, your info is still stored safely on your smartphone until you recharge the battery or connect your smartphone to a power source.

C H A P T E R

11