Palm Zire 72 manual Choosing whether application information is updated, Conduit

CHAPTER 5

»	Key Term
	Conduit The
	synchronization software
	that transfers information
	between an application
	on your computer and the
	same application on your
	handheld.

Synchronizing Your Handheld with Your Computer

Cont’d.	HotSync Enabled/Disabled Sets your computer to respond to synchronization
	requests from your handheld.
	Enable HotSync software at system startup Sets your computer to
	automatically respond to synchronization requests each time you start your
	computer. If this option is not selected, you must open HotSync Manager and
	select the Enabled option before you can synchronize.
	Show more detail in HotSync Log Includes more troubleshooting information
	in the log that is generated when you synchronize.
3	Close the HotSync Software Setup window.
		Done

Choosing whether application information is updated

By default, when information in each application is updated in one place (your handheld or your computer), it is updated in the other. However, for an application included during synchronization, you can choose whether information that has been updated in one place is updated in the other during the next synchronization.

Zire™ 72 Handheld 93