Palm Zire 72 manual Using the full-screen writing area, Open an application

CHAPTER 27 Customizing Your Handheld

[ ! ] Before You Begin

Turn on Writing Area Preferences as described in the previous section.

Tip

Right after you write a character, your handheld interprets a quick tap on the screen as a period character. If you want to tap a button, either wait a few seconds or temporarily turn off full- screen writing by tapping the shaded box in the lower-right corner. The shaded box changes to a box outline when Writing Area Preferences are off.

Using the full-screen writing area

1	Open the entry where you want
	to enter information:
	a. Open an application.
	b. Select a record or tap New.
			Shaded box
			indicates Writing
			Area is on
2	Position the cursor where you want the characters to appear and do any of the
	following:
	•	Write lowercase Graffiti 2 letters anywhere on the left side of the screen.
	• Write numbers anywhere on the right side of the screen.
	•	Write uppercase letters in the middle of the screen.
	•	Write the Punctuation Shift stroke before writing symbols and other special
		characters.

• Use buttons and other controls that appear on the screen by tapping and holding the button or control until it activates.

Done

Zire™ 72 Handheld 580