Palm Zire 72 manual Connecting wirelessly, My handheld cannot connect to my mobile phone

CHAPTER 29 Common Questions

Connecting wirelessly

My passkey is rejected when I attempt to form a trusted pair with my mobile phone.

Some mobile phones require that you enter the passkey within a specific time frame. Make sure you have a passkey in mind and that you enter it immediately when prompted.

If your passkey is rejected, your phone may have a preassigned passkey; see the documentation included with your phone for information. The documentation might refer to a Bluetooth connection as a Bluetooth pair, Bluetooth link, or bonded pair.

If you need additional information about pairing your phone and handheld, refer to the Phone Pairing Handbook at www.palmOne.com/support/intl.

My handheld cannot connect to my mobile phone.

Use the following steps to test the connection:

1.Draw the Graffiti® 2 writing Command stroke and select the Bluetooth indicator to open the Bluetooth settings screen. You can select the indicator even if it is dimmed.

2.Make sure On is selected.

3.Tap the Service pick list and select the service that you want to use to connect to your phone.

4.Tap Connect.

If the connection is successful, open the application that requires the connection and complete the desired task.

If the connection is not successful, try the following steps:

Zire™ 72 Handheld 634