Palm Zire 72 manual Select phone Select if your phone does not appear

CHAPTER 17 Connecting Wirelessly to Other Devices

Tip

If you receive a message	3	Select the phone you want to connect to:
that your phone is not
ready to accept a		a. Tap the Manufacturer and Model pick lists, select the correct entries for your
connection, check to
		phone, and then select Next.
make sure that your
phone is prepared to		b. The Connection Setup screen displays all Bluetooth phones within range. If
make a Bluetooth		your Phone did not show up on the discovery results, select Find More to
connection. See the		search again.
instructions included with		(Windows only) If the phone still does not appear, run the Phone Link
your phone.

Updater application and then go to step 4. Phone Link Updater is installed on your desktop computer when you install Palm Desktop software from the CD.

(Mac only) If the phone still does not appear on the list, go to www.palmone.com/us/support/downloads/phonelink.html to download the driver for your phone, and then go to step 4.

c. Select the phone you want, select OK, and then select Next again.

Select phone

Select if your phone does not appear

Continued

Zire™ 72 Handheld 281