Palm Zire 72 manual Entering an address directly in the To field

CHAPTER 18 Sending and Receiving E-mail Messages

Tip

You can’t see the whole list of addresses in a field if the list is longer than two lines. To see the whole list, tap the word To, cc, or bcc.

Tip

It's OK to enter commas instead of semicolons between addresses, because they’re changed to semicolons. But you can't use other punctuation or no punctuation between addresses.

Entering an address directly in the To field

1	On the New Message screen, tap or navigate to the To field.
2	Enter an address using one of
	the following methods:

Single address in To field Enter the address, and then tap Done

Multiple addresses in To field Enter a semicolon (;) and then a space between recipient names.

Single address on Recipient List Tap To and enter the address on the Recipient List screen, and then tap Done. Use the shortcut buttons at the bottom of the screen for quick address entry.

Multiple addresses on Recipient List Enter a semicolon (;) and then a space between recipient names.

Done

Zire™ 72 Handheld 335