Messages, On the television | Panasonic DMR-EH60 guide

Messages

On the television		Page
Cannot finish recording	≥The program was copy-protected.	—
completely.	≥The HDD or disc may be full.	—
	≥The maximum number of times you can record the program is exceeded.	—

Cannot play.	≥You inserted an incompatible disc (Discs recorded in PAL video, etc.).	—

Cannot record on the disc.	≥The disc may be dirty or scratched.	5

Unable to format.
Please check the disc.

Cannot play back on this DVD-	≥You tried to play a non-compatible image.	35
Recorder.	≥Turn the unit off and re-insert the card.	5

Cannot record. Disc is full.	≥[HDD] [RAM] Create space by erasing any unnecessary titles.	32, 39, 51
	[Even if you erase recorded content from the DVD-R or +R, there is no increase in disc
Cannot record. The number of
titles has exceeded the	space. Available disc space on DVD-RW (DVD-Video format) increases only when the last
maximum limit.	recorded title is erased.]	—
	≥Use a new disc.	—

Error has occurred. Please	≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering	—
press ENTER.	(“SELF CHECK” appears on the unit’s display).

No disc	≥The disc may be upside down.	—

No folders.	≥There is no compatible folder in this unit.	9
No SD Card	≥The card is not inserted. If this message is displayed with a compatible card already	5
No valid SD card.	inserted, turn off the unit, remove and then re-insert the card.
	≥The card inserted is not compatible or the card format does not match.	9

There is not enough free space	≥Create space by erasing any unnecessary items.	32, 35, 39,
on dubbing destination.		42, 51
	≥Erase one or more items registered on the transfer (dubbing) list to ensure that the	45, 49
	“Current capacity” is not exceeded.

Please change the disc.	≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit to remove	5
	it and check it for scratches or dirt. (The unit turns off automatically after you open the tray.)

This is a non-recordable disc.	≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,	8, 9
	DVD-RW (DVD-Video format) or +R.
This disc is not formatted	DVD-RW (DVD-Video format) or +R.	51
properly.	≥You inserted an unformatted DVD-RAM or DVD-RW.	51

$	≥The operation is prohibited by the unit or disc.	—

On the unit’s display

The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.

CHK REMOTE 	≥The remote control and main unit are using different codes. Change the code on the			19
(“∑” stands for a number.)		remote control.
			Press and hold [ENTER] and the indicated number button at
			Press and hold [ENTER] and the indicated number button at
			the same time for more than 2 seconds.


HARD ERR	≥If there is no change after turning the unit on and off, consult the dealer where the unit was			—
		purchased.

HDD SLP	≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate.			4

NO READ	≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.			5
	≥You have used a DVD lens cleaner and it has finished. Press [< OPEN/CLOSE] on the			5
		main unit to eject the disc.

PLEASE WAIT	≥Displayed when the unit is started. This is not a malfunction.			—
	≥The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE			—
		WAIT” is displayed.

SELF CHECK	≥There was something unusual detected with the disc while recording, playing or			62
		transferring(dubbing), there was a power failure or the AC plug was disconnected while the
		unit was on. The unit is carrying out its recovery process. This process restores the unit to
		normal operation. The unit is not broken. Wait until the message disappears.

UNFORMAT	≥You inserted an unformatted DVD-RAM or a DVD-RW that is unformatted or recorded on			—
		other equipment.

UNSUPPORT	≥You have inserted a disc the unit cannot play or record on.			8, 9

U59	≥The unit is hot.			—
		The unit switches to standby for safety reasons. Wait for about 30 minutes until the
		message disappears.
		Select a position with good ventilation when installing the unit. Do not block the cooling fan
		on the rear of the unit.

U99	≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to			—
		standby. Now press [POWER Í/I] on the main unit again to turn the unit on.

H or F	≥There is something unusual. (The service number displayed after H and F depends on the			—
		unit’s condition.)
	≥Check the unit using the troubleshooting guide. If the service number does not disappear,			62–66
		do the following.
		1. Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.
		2. Press [POWER Í/I] to turn the power on. (The unit may be fixed.)
		If the service number does not disappear despite doing the above, request service from
		the dealer. Inform the dealer of the service number when requesting service.

R:	≥The unit is showing you the remaining time on the HDD or the disc. (This does not indicate			20
(e.g., R44:00)		a malfunction.)
		In the display across the letter “R” means “Remain” and the numbers mean remaining time
		(hours:minutes).

Reference

RQT8307

59

Image 59

Panasonic DMR-EH60 warranty Messages, On the television, On the unit’s display

Contents

Example Warranty can be found on Important Safety Instructions Useful features Table of contents HDD Hard disk drive handling care Inserting/Removing the SD card Disc and card handlingUnit care SAP Using DVD-R, DVD-RW and +R on this unitPlaying the disc on other DVD players Batteries Use AccessoriesRemote control DVD Video Recording format DVD-Video format HDD, disc and card informationHDD and discs you can use for recording and play Play-only discs 12 cm 5z/8 cm 3z Data that can be recorded and played Instructions Cards useable on this unitDiscs that cannot be played Type These operations are also possible… ≥Changing channels RQT8307 Press the Smart Wheel lightly when turning it Opening the front panel Power button Power Í/IMain unit Unit’s display Sec. Quick Start for Recording & EPG Display When the unit is not to be used for a long timeConnection with a television and video cassette recorder To enjoy even higher picture quality Connection with a cable TV box and video cassette recorder Setting the IR Blaster To enjoy even higher picture quality ConnectionConnection for transferring dubbing from video tape If the antenna connector doesn’t match Connecting an amplifier or system component Your television Press Í DVD PowerFollowing the on-screen messages Input the operating environment for Press Enter Leave this unit in the standby modeSet contents are displayed together ≥Aspect 43/Aspect Selecting television typePress 3, 4 to select the item and press Enter Return Television operation Press SetupPress 3, 4 to select Setup Power saving function Recording television programs After recording Recording modes and approximate recording timesBefore recording Recording for High-Speed Dubbing Selecting audio to recordPress Audio Flexible Recording Playing while you are recording Press 3, 4, 2, 1 to select Scheduled recordingPress the Green button Press TV Guide Press Schedule Enter the settingsTo cancel recording when it has already begun Manually programming scheduled recordings Dubbing Using VCR Plusi system to make scheduled recordingsScheduled recording Press 3, 4 to select the program Check, change or delete a program Registering a program you don’t want to miss as Favorite Utilizing the TV Guide On ScreenTM systemTo change to the selected channel Promotions screen Setup screenChange channel display menu-CHANNEL Messages screen Playing recorded video contents/Playing play-only discs Operations during play Changing audio during play Simple editing operations during play Press 3, 4 to select the track and press Enter Using menus to play MP3Using the tree screen to find a group Press TOP Menu Playing still pictures JPEG/TIFF Play Useful functions during still picture Press Display Using on-screen menus/FUNCTIONS window and Status messageUsing on-screen menus Press Status Functions windowPress 3, 4 to select an item Status messages Press 3, 4, 2, 1 to select the chapter Editing titles/chaptersEditing titles/chapters and playing Chapters Combine Title operationsChapter operations Creating playlists Creating, editing and playing playlistsPress 2, 1 to select the source title and press Press 2, 1 to select the position to Playlist operations Editing and playing playlists/chaptersPress SUB MENU, then 3, 4 to Select the operation and press Enter Picture and folder operation Editing still pictures Transferring dubbing direction Transferring dubbing modeTransferring dubbing speed mode types and features Transferring dubbing titles or playlists Transferring dubbing titles or playlists Set the recording modeOne Touch Transfer dubbing Set the transfer dubbing direction Press 3, 4 to select Start Dubbing and press Enter DVD-V HDD ≥If you are not going to change the setting stepWhen the top menu is displayed Set Time Limit Press ¥ REC Recording from a video cassette recorderManual recording Start play on the other equipment To register individual still pictures Transferring dubbing using the transferring dubbing listTransferring dubbing still pictures Register still pictures for transfer dubbing SD HDD or RAM To select another folderStructure of folders displayed by this unit Folder and press Enter Press 2, 1 to select Providing a name for a disc Common proceduresSetting the protection HDD, disc and card management Erasing all titles and playlists-Erase All Titles Erasing all the contents of a disc or card-Format Press 2, 1 to select Start Enabling discs to be played on other equipmentPress 3, 4 to select Finalize Press 2, 1 to select Yes Press Set Entering textShow Enter Name screen Press 3, 4, 2, 1 to select a character and press Enter Press 3, 4 to select the tab and press Changing the unit’s settingsSummary of settings Setup Video DTS Changing the unit’s settingsTabs Menus Screen CH W Auto channel/clock settingsAdjust Time Zone Press To select s1 or r1 Press 2, 1 to return to the Channel Number column Channel captionsPress 3, 4 to select the caption and press Press 3, 4 to select the first character and press On the unit’s display MessagesOn the television PCM DTS Frequently asked questionsCover TV Guide On Screen TM system Troubleshooting guide Remote control doesn’t Picture quality when adjustedLow volume Cannot switch audio Troubleshooting guide Display No Listing On, and when you try to startTV Guide On ScreenTM system As soon as the unit is turned Scheduled recording, the TV Title operation Start point Cannot erase chapters ≥This occurs as scenes change during Quick View Tiff Specifications Glossary Product information Product Service Panasonic Canada Inc Limited WarrantyWarranty Service If YOU Ship the Product to a Servicentre Memo Index