Disc and card handling
∫How to hold a disc or card
Do not touch the recorded surface or the terminal surface.
∫Concerning
Be careful about scratches and dirt.
∫If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫Handling precautions
≥Do not attach labels or stickers to discs. (This may cause disc warping and
≥Write on the label side of the disc only with a soft,
≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
≥Do not use
≥Do not expose the terminals of the card to water, garbage or other strange things.
≥Do not drop, stack, or impact discs. Do not place objects on them. ≥Do not use the following discs:
shapes.
≥Do not place in the following areas:
≥To protect discs from scratches and dirt, return them to their cases or cartridges when you are not using them.
Getting started
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company. ≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
Unit care
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Observe the following points to ensure continued listening and viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.
Use the DVD lens cleaner about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.
DVD lens cleaner:
Do not place the unit on amplifiers or equipment that may become hot.
The heat can damage the unit.
[Note]
Do not obstruct the rear panel’s internal cooling fan.
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the unit.
Inserting/Removing the SD card
Only insert or remove the SD card after turning the unit off.
When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card. Such action may result in malfunction or loss of the card’s contents.
Opening the cover | Inserting the card |
|
|
Press down. | Press on the center of | If you are using a |
|
|
| ||
| the card until it clicks into | miniSDTM card, insert it |
|
| place. | into the miniSDTM card |
|
|
| adaptor that comes |
|
|
| with the card. | ADAPTER |
|
| Insert and remove this |
|
|
| adaptor from the unit. |
|
| Insert the card label up with the |
| |
| corner on the right. |
|
|
| (Do not forget to close the cover. ➡ right) |
| |
Removing the card | Closing the cover |
1Press on the center | Push up. |
| |
of the card. |
|
2Pull it straight out.
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 9).
Keep the small memory cards such as the SD Memory Card out of reach of children. If swallowed, seek medical advice immediately.
RQT8307
5
