Basic Operation
Basic Operation
Switching the Phone On/Off
To switch the phone on or off.
Press and hold E to switch power on
A greeting will be displayed and then the phone will go into Idle mode.
Press and hold E to switch power off
Making a Call
Ensure that the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area.
1Enter area code and phone number
2Press D
International Dialling
Using the automatic international access code (+) you will be able to dial international numbers without having to know the code for the international exchange.
If the international number is known then it can be entered in the normal fashion followed by the area code and phone number.
1 Press and hold 0 until + is displayed
2 Use e to cycle through the abbreviated international names and press Q to select the required code
3Enter area code and phone number
4 Press D
Note: Many countries include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your Service Provider.
8
