Basic Operation
Caller Identification
This feature allows you to identify incoming calls and accept or reject them. The caller’s phone number, and name if stored in Phonebook, will be displayed.
Note: Caller Identification may not always be available.
Earpiece Volume Control
The volume level may be adjusted during a call: Use a to decrease the volume
Use b to increase the volume
Volume control for Personal Handsfree accessory is adjusted in the same manner.
Locking the Phone
With the Phone Lock enabled you will be restricted to answer incoming calls and make emergency calls only. The Phone Lock Code is factory set to “0000”.
1 From Idle mode press Q, select Phone Menu > Security > Phone Lock and press Q
2Enter the
The phone will be locked and the lock icon (O) will be displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code and press Q. The lock icon will be removed from the display. However, once you turn the phone off and on again you will need to
Code, and when the correct code has been entered 
will be displayed. Press Q.
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1From Idle mode press Q, select Phone Menu > Security > Phone Lock and press Q
2Select Disable press Q
3Enter the
10
