Basic Operation

Using the PIN

The PIN (Personal Identification Number) protects your SIM against unauthorized use. If you enable the PIN, every time the phone is turned on you will be prompted to enter the PIN.

The PIN2 controls security for the Fixed Dial Store, Call Charge metering and Barred Dial.

Enabling/Disabling the PIN

1From Idle mode press Q, select Phone Menu > Security > PIN and press Q

2Use a select Enable / Disable or Change the PIN and press

Q

3Enter PIN (Between 4 and 8 digits) and press Q

Setting Vibration Alert

When vibration alert is switched on the phone will vibrate when a call is received. Switching on vibration alert will silence the ring volume. If, however, the ring volume is adjusted after the vibration alert is switched on, the phone will ring and vibrate when a call is received. From Idle mode:

Press and hold # to switch on or off. When activated, the phone will vibrate briefly.

Setting Ring and Key Volume

Changing either the ring volume and key volume is done in the same manner. If you increase the ring volume above maximum it will set an escalating ring tone. If you turn the ring volume off, the silent indicator icon ([) will be displayed.

1From Idle mode press Q, select Personalise > Tones and press Q

2Select Ring Volume or Key Volume and press Q

3Use e to set the volume level and press Q

11

Page 19
Image 19
Panasonic EB-GD96 Using the PIN, Setting Vibration Alert, Setting Ring and Key Volume, Enabling/Disabling the PIN