Call Information

Setting the Maximum Unit Level

This function is SIM dependent

1From Idle mode press Q, select Phone Menu > Call Service > Service Charges > Max Cost and press Q

2Press Q twice to edit the values

At this point you will be asked to enter your PIN2 or lock code then press Q.

3Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost will be displayed

4Press Q twice to accept

Note: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider.

Setting a Warning Level

A warning can be set as an indication that the maximum cost is about to be reached. This function is SIM dependent.

1From Idle mode press Q, select Phone Menu > Call Service > Service Charges > Warning at and press Q

2Press Q twice to edit the value

3Enter a value (in units) at which time you would like the warning to sound and press Q twice

Call Identification

In the Call Service menu, the Caller’s ID and Withhold ID functions allow you to check the status of whether a Caller’s Identification is sent or can be received. (Withhold ID is Network Dependent)

Note: When checking the status the phone must be registered with a network.

38

Page 46
Image 46
Panasonic EB-GD96 operating instructions Call Identification, Setting the Maximum Unit Level, Setting a Warning Level