Personalising Your Phone
Voice Dial Entry Setup
This function allows you to recall and dial numbers from your Phonebook using voice commands.
1From Idle mode press Q, select Personalise > Voice Command > Voice Dial and press Q
2Press Q to add a new Voice Dial entry to the list
3Browse through the Phonebook to select an entry which you wish to attribute a voice command to, and press Q twice
Note: Each recording is short in length, so be prepared to speak once you have initiated the recording.
4When ready, hold the phone approximately 7” (178mm) from your mouth, press Q and speak clearly into the microphone to record the name of the selected Phonebook entry
When the recording has stopped, you will be prompted to repeat the name.
5Press Q and repeat the name
Once recording is complete for a second time, the display will indicate if the recording was successful or not. If unsuccessful, repeat from step 4.
Recalling Voice Dial Entries
From Idle mode move and hold the navigation key (g) in any one of the four directions a, b, c or d. Speak clearly the name you wish to recall (exactly as recorded) and wait
The above procedure will recall the phone number and the recorded Voice Dial entry is repeated; to initiate the call press D.
Dialling Voice Dial Entries
Using Permission
From Idle mode press Q, select Personalise > Voice Command > Permission and press Q
With this function enabled a recalled phone number is automatically dialled without further intervention.
Repeat this process to disable the Permission function returning to Voice Dial recall only
22
