Panasonic EB-GD96 operating instructions Call Duration, Call Charges, Setting the Unit Price

Call Information

Call Duration

1From Idle mode press Q, select Phone Menu > Call Service > Calls and press Q

Note: The Calls function is SIM dependent. If the SIM does not support this function then items under Calls menu will be found directly under Call Service menu.

2Use e to select one of the functions described below, and press Q

The Last Call function will display the duration and call charge, if available, of the last call during Idle mode or the current call during a call. Times are indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.

The All Calls function displays the accumulated duration and call charge, if available, of Incoming and Outgoing calls. The lock code or PIN2 is required to reset the timer and call charge.

Call Charges

To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall. This function is SIM dependent.

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time.

1From Idle mode press Q, select Phone Menu > Call Service > Service Charges > Price/Unit and press Q

2Press Q to edit the values

At this point you will be asked to enter your PIN2 or Lock code then press Q.

3Enter a currency unit (up to three characters) and press Q twice

4Enter a price and press Q twice

37