Setup Base Unit, For replacement only

Setup (Base Unit)

Ink film – installing / replacing!

Install the included ink film or replace the used ink film with a new one. The following ink films are available for replacement.

Model No. KX-FA53A:Replacement film (1 roll)

Model No. KX-FA55A:Replacement film (2 rolls)

Each roll prints about 140 A4-sized pages or 150 letter-sized pages. See page 10 for accessory information.

1	Open the front cover by pulling up the centre
	part.

2 Push the back cover open button (green) on the right side of the unit.

Push the back cover open lever (green) inside of the unit.

3 Open the back cover.

●For first time installation of the supplied ink film, skip to step 6.

Centre part

Front cover

Back cover open button (green)

Back cover	OR
open lever (green)

Back cover

4	For replacement only	Used core
4	Pull out the blue gear and remove the used	Used core
	ink film. Remove the used core.

		Used
	Blue	ink film
	Blue
(continued)	gear

Page 13

Image 13

Panasonic KX-FC175AL manual Setup Base Unit, Ink film installing / replacing, For replacement only

Contents

Operating Instructions For your future reference Things you should keep a record For Australian users Service difficulties InstallationImportant information for Australian users Operating distance and noise Battery chargeRaise the antennas vertically Important safety instructions Safety instructions Splash-resistant Handset only BatteryShock-resistant Handset only Table of Contents Programmable Features Included accessories AccessoriesAccessory information Model No Specifications / Usage Overview Help functionHelp SET Location Finding the Controls Base Unit Ink film installing / replacing Setup Base UnitFor replacement only Correct Incorrect Remove the stoppers and tags from the new Recording paper Paper trayAdding paper Tension plate To use the fax machine with a computer on the same line Connections Date and time, your logo and facsimile telephone number Setting the date and timeMenu SET Stop Setting your logoMute Menu SET Recall To select characters with the dial keypad To select characters using +orDisplay order of characters Menu SET Recall Setting your facsimile telephone numberTo delete a number Belt clip and headset Setup HandsetBelt clip Headset optional Battery life Battery strengthAutomatic security code setting Recharge Adjusting handset volume VolumeAdjusting base unit volume Phone calls making Making and Answering CallsWith the handset With the base unit Digital SP-PHONE Microphone Auto talk feature Handset Any key talk feature Handset is on the base unitPhone calls answering FUNCTION/EXIT Talk Paging the base unit from the handset IntercomPaging the handset from the base unit Intercom LOCATOR/INTERCOM From the handset to the base unit Transferring a callFrom the base unit to the handset Navigator Directory Using the handsetStoring names and telephone numbers into the directory CLR FUNCTION/EXIT SET Using the base unitRECALL/CALL Wait Menu Hyphen Helpful hint To delete a character/number Editing a stored item Stored name and number are erased Erasing a stored item Talk FUNCTION/EXIT Making a phone call using the directoryStop Digital SP-PHONE To search for a name by initial To confirm caller information using the Caller ID list Caller ID service from your phone companyCaller ID How Caller ID is displayed Display while viewing Viewing and calling back using caller informationTo stop viewing To display the caller’s telephone number FAX/START Stop Digital SP-PHONE Caller ID Talk Erasing specific caller information using the handset Erasing all caller information using the handsetErasing caller information FUNCTION/EXIT CLR Erasing specific caller information using the base unit Erasing all caller information using the base unitCaller ID Erasestop Into the handset Storing caller informationInto the base unit Initiating voice contact Voice ContactReceiving a request for voice contact Digital SP-PHONE Talk Sending a fax manually Sending FaxesDigital SP-PHONE Stop REDIAL/PAUSE FAX/START Documents you can send Stop FAX/START Sending a fax using the directoryFax auto redial If your unit does not send a fax Programming items into the broadcast memory Broadcast transmissionSET Menu Stop Erasing a stored item in the broadcast memory Adding a new item into the broadcast memory Sending the same document to pre-programmed parties To cancel the broadcast settingStop SET To send to selected parties only once When receiving phone When receiving calls Calls Setting the unit to receive faxesWhen receiving faxes Receiving Faxes Fax receiving Phone call When receiving phone callsRemote Fax activation Activating TEL mode TEL mode Answering all calls manuallyReceiving a fax using the base unit Receiving a fax using Activating FAX only mode FAX only mode All calls are received as faxesSET Auto Answer Fax calling Recognition ring setting Tone Delayed ring setting Phone callTo set TEL/FAX mode Call is received When an extension telephone is connected When your pager receives a pager call Pager call when the unit receives a fax or ! voice messageExtension telephone Setting Using with the ring detection featureReceiving Faxes / Distinctive Ring Menu Copying To select the resolutionMaking a copy Copy Start Stop To reduce a document To enlarge a documentTo collate multiple copies TAD/FAX mode Receiving phone calls and faxes automatically SetupSetting up the voice and fax message reception Ring setting in TAD/FAX mode Recording your own greeting messages GreetingSuggested messages Auto Answer SET Stop Erasing your own recorded greeting messages Greeting / Memo MessageLeaving a message for others or yourself Erase SET Stop Incoming Messages Listening to recorded messages using the base unitSlow SET Stop Quick Erase When there are no new messages Listening to recorded messages using the handsetWhen voice memory is full Playback Operating from a remote location Remote OperationRemote operation card Recording a message in a mailbox Listening to recorded messages Key Remote commandTo repeat a message Press Other remote operations How callers can leave you private messages Voice MailboxTo use a mailbox How incoming messages are recorded in a mailbox Menu SET Stop Recording your own mailbox greeting messagesTo check the mailbox greeting message To erase your own mailbox greeting message To record a memo message into a mailbox Erase Record Play Messages SET StopTo erase all the messages in a mailbox For mailbox Listening to recorded messages from a remote locationTo repeat only the new messages To listen to messages in another memory after playback Transferring recorded messages to another telephone OptionRecording your own transfer greeting message To check the transfer greeting message Programming Features SummaryGeneral programming method How to set menu options Basic featuresError Programming table Tone VOX OFF Advanced features Normal Setting the recording time alert Setting the message alertSetting the memory reception #41 Check Setting the incoming message Setting the message transfer#58 #60 TAD/FAX Australia Reports Error Messages Display Display message Cause & solutionBase unit There is something wrong with the modem circuit. Contact our General Operations RECALL/PLAYBACK Cordless handset Fax receiving Fax sending Copying Receiving mode Answering device If a power failure occursCannot retrieve recorded messages from a remote location Messages in the mailbox do not play back Recording paper jam Jams Replacing the handset battery Jams / BatteryDocument jams sending Document feeder Cleaning Do not touch the black sheets on the thermal head Thermal head Reference lists and reports Printed ReportsStop Menu SET Technical data about this product Specifications Specifications Index Code Feature nameProgram index Quick Redial Search Slow Index Index PFQX1652ZA WM1201ST0