1Press p.
Display:
2Press (or )until the following is
displayed.
3Press w.
4Enter your logo, up to 30 characters, using
the dial keypad. See the next page for details.
Example: “Bill”
1. Press 22 times.
Cursor
2. Press 46 times.
3. Press 56 times.
4. Press )to move the cursor to the next
space and press 56 times.
5Press w.
The next feature will be displayed.
6Press p.
YOUR FAX NO.
PRESS SET
LOGO=Bill
LOGO=Bil
LOGO=Bi
LOGO=B
LOGO=
AAAAAAAAA
YOUR LOGO
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
18
Setup (Base Unit)

Setting your logo

(Hyphen)
(Delete)
STOP
MUTE
(Insert)
Display
SET
MENU
RECALL
To correct a mistake
Press (or )to move the cursor to the
incorrect character, and make the correction.
To delete a character
Move the cursor to the character you want to
delete and press {(Delete).
To insert a character
1. Press (or )to move the cursor to the
position to the right of where you want to
insert the character.
2. Press r(Insert) to insert a space and
enter the character.
Note:
You can enter your logo by pressing +or
-(see the next page) in step 4. In this
case, press )to move the cursor.
The logo can be your company, division or name.