Panasonic KX-FC175AL #58, Setting the message transfer, #60, Transfer greeting message, #61, #67

Features Summary

Advanced features (cont.)!

How to set menu options

1.Press p.

2.Press (or )until the following is displayed:

ADVANCED MODE

PRESS SET

then press wand press (or ) until the desired feature is displayed.

3.Press +or -until the desired setting is displayed.

4.Press w.

5.Press p.

Note:

●Step 3 may be slightly different depending on the feature.

●See page 69 for more details.

Programming table (cont.)

Code		Feature & Display		Settings	How the unit operates
		Setting the original mode		NORMAL	“NORMAL”: Used for normal
					writing.
		ORIGINAL
					“LIGHT”: Used for faint writing.
		MODE=NORMAL	[±]
#58					“DARKER”: Used for dark writing.
	To send or copy a document with			LIGHT
					● This feature will return to the
		faint or dark writing, set this feature
					normal mode after transmission
		before starting transmission or
				DARKER	or copying.
		copying.
		Setting the message transfer			1. Follow steps 1 and 2 above.
					2. Press +or -to select “ON”.
		MESSAGE TRANS.		ON
					3. Press w.
		MODE=OFF	[±]
					4. Enter the transfer telephone
#60		To transfer a recorded incoming
					number.
		message to another telephone
					5. Press w.
		(p. 68).
					6. Press p.
				OFF
					● This feature can be turned on/off
					from a remote location (p. 63).
		Transfer greeting message		CHECK	See page 68 for details.
#61		(checking, recording or erasing)
				RECORD
	TRNS-GREETING
		CHECK	[±]	ERASE
		Setting the incoming message			If you select “OFF”, you cannot
		monitor		ON	monitor the incoming message.
		ICM MONITOR
#67		MODE=ON	[±]
	To hear an incoming message
		(ICM) from the speaker when the		OFF
		answering device is recording the
		message.
				(The default setting is in bold type.)

76