Panasonic KX-FC175AL #41, Setting the message alert, #42, Setting the recording time alert, #43

Features Summary

Advanced features (cont.)!

How to set menu options

1.Press p.

2.Press (or )until the following is displayed:

ADVANCED MODE

PRESS SET

then press wand press (or ) until the desired feature is displayed.

3.Press +or -until the desired setting is displayed.

4.Press w.

5.Press p.

Note:

●Step 3 may be slightly different depending on the feature.

●See page 69 for more details.

Programming table (cont.)

Code	Feature & Display		Settings	How the unit operates
	Changing the fax activation code			1. Follow steps 1 and 2 above.
			ON /	2. Press +or -to select “ON”.
	FAX ACTIVATION
			CODE=?9	3. Press w.
	MODE=ON	[±]
#41	If you use an extension telephone			4. Enter your code from 2 to 4 digits,
				using 0–9 and :.
	and wish to use it to receive a fax,
	activate this feature, and enter the		OFF	5. Press w.
				6. Press p.
	code (p. 52).
				● Do not enter “0000”.
	Setting the message alert		ON	If you hear slow beeps, press
				LMor •
	MESSAGE ALERT
#42				and listen to recorded messages
	MODE=OFF	[±]
	To alert you with beeps when a		OFF	(p. 59, 60). The beeps will stop.
	new voice message is recorded.
	Setting the recording time alert			If you hear slow beeps, erase the
			ON	recorded messages (p. 59, 60, 66).
	REC. TIME	ALERT
#43	MODE=OFF	[±]		The beeps will stop.
	To alert you with beeps when there
	is less than 60 seconds of		OFF
	remaining recording time.
	Setting the memory reception			If you are alerted by a slow
	alert		ON	beeping sound, clear the printing
				problem and make sure the unit is
	RECEIVE ALERT
				supplied with enough paper to print
#44	MODE=ON	[±]
	To alert you with a beeping sound			the stored document. The beeps
				will stop.
	when a document which has been
			OFF
	received is stored into memory due
	to some existing problem.
			(The default setting is in bold type.)

74