![](/images/new-backgrounds/1156683/15668397x1.webp)
8. Programmable Features
8.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 18 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 19 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 20 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission results (page 27).
“ERROR” (default): A sending report will be printed only when fax transmission fails. “ON”: A sending report will be printed out after every transmission.
“OFF”: Sending reports will not be printed out.
Code #06
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select from “2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”. If you are using the unit with an answering machine, set to more than 4 (page 33).
Code #06
TAD RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in TAD/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”, “TOLL SAVER” or “RINGER OFF”. See page 32 for details.
Note:
LSet feature #77 to “TAD/FAX” (page 51) beforehand.
Code #06
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”.
Note:
L Set feature #77 to “FAX ONLY” (page 51) beforehand.
Code #10
RECORDING TIME
=VOX [±]
“VOX” (default): Unlimited.
“1
Code #11 (KX-FP145 only): Setting the remote operation ID
REMOTE TAD ID
=ON[±]
1.Press {MENU}.
2.Press {#}, then {1}{1}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter any
L The default ID is “222”.
6.Press {SET}.
7.Press {MENU}.
Code #13: Setting the dialling mode (For Australian users only)
DIALLING MODE
=TONE [±]
If you cannot dial, change this setting depending on your telephone line service. “TONE”(default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A[±]
You can select “A” (default), “B” or “C”.
47