8. Programmable Features
1.Press {MENU}.
2.Press {#}, then {5}{1}.
3.Enter a
L The default ID is “555”.
4.Press {SET}.
5.Press {MENU}.
Code #52 (KX-FP145 only): Setting the mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your messages, program a password for mailbox 2.
1.Press {MENU}.
2.Press {#}, then {5}{2}.
3.Enter a
L The default ID is “555”.
4.Press {SET}.
5.Press {MENU}.
Code #54
GREETING TIME
=16s [±]
“16s” (default): Maximum recording time is 16 seconds.
“60s”: Maximum recording time is 60 seconds. See page 38 for details.
Code #55 (KX-FP145 only): Greeting message for mailbox 1
BOX1 GREETING
CHECK [±]
See page 42 for details.
Code #56 (KX-FP145 only): Greeting message for mailbox 2
BOX2 GREETING
CHECK [±]
See page 42 for details.
Code #58: Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint or dark writing, set this feature before starting transmission or copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #60 (KX-FP145 only): Setting the message transfer
MESSAGE TRANSFER
=OFF [±]
To transfer recorded incoming messages to another telephone (page 44), activate this feature and program the transfer telephone number.
1.Press {MENU}.
2.Press {#}, then {6}{0}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter the transfer telephone number.
6.Press {SET}.
7.Press {MENU}.
Code #61
CHECK [±]
See page 44 for details.
Code #67 (KX-FP145 only): Setting the incoming message monitor
ICM MONITOR
=ON[±]
To hear an incoming message (ICM) from the speaker when the answering device is recording the message.
“ON” (default): You can monitor the incoming message.
“OFF”: Deactivates this feature.
Code #68: Setting the Error Correction Mode (ECM)
ECM SELECTION
=ON[±]
This feature is available when the transmitting/receiving fax machines are ECM compatible.
“ON” (default): To send a fax even if there is static interference on the telephone line.
“OFF”: Deactivates this feature.
Note:
LYou cannot change the setting when received documents are in memory.
50
