2. Preparation

18

Initial Programming
2.4 Date and time
You must set the date and time.
1Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[()]
2Press {<} or {>} repeatedly to display the
following.
SET DATE & TIME
PRESS SET
3Press {SET}.
LCursor (|) will appear on the display.
M:|01/D:01/Y:03
TIME: 12:00AM
4Enter the current month/day/year by
selecting 2 digits for each.
Example: August 10, 2003
Press {0}{8} {1}{0} {0}{3}.
M:08/D:10/Y:03
TIME: |12:00AM
5Enter the current hour/minute by selecting 2
digits for each. Press {*} to select AM or
PM.
Example: 3:15PM (12 hour clock entry
only)
1. Press {0}{3} {1}{5}.
M:|08/D:10/Y:03
TIME: 03:15AM
2. Press {*} repeatedly to display PM.
M:|08/D:10/Y:03
TIME: 03:15PM
6Press {SET}.
LThe next feature will be displayed.
7Press {MENU} to exit the program.
Note:
LThis information will be printed on each page
transmitted from your unit.
LThe accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
{SET}{MENU}
{<}{>}
FP141-145AL.book Page 18 Tuesday, October 21, 2003 11:07 AM