2. Preparation
2.2 Battery charge
Place the handset on the cradle of the base unit for about 9 hours before initial use.
1
2
LA beep will sound and the base unit display will show “CHARGING” for an instant, then the date and time will be displayed.
Note:
LTo ensure the battery charges properly, clean the handset charge contacts (1) and the charger charge contacts (2) with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust
or high humidity.
LThe battery cannot be overcharged.
Battery strength
You can verify the battery strength on the handset display.
Handset display | Battery strength | |
12223 | Fully charged | |
|
| |
1 223 | Medium | |
|
|
|
1 | 23 | Low |
|
|
|
01 | 234 | Needs to be recharged. |
(flashing) |
| |
|
|
|
Battery life
LBattery life is dependent on use and conditions, but in general if your Panasonic battery is fully charged:
–it should last up to 5 hours while in use (in conversation).
–it should last up to about 11 days while not in use (off the base unit).
Recharge
Recharge the battery when:
–the handset beeps intermittently while it is in use.
– “Recharge” is shown and 01 234 flashes on the handset display.
LRecharge the handset battery for more than 15 minutes, or the display will continue showing the indication.
Automatic security code setting
The security code helps to avoid unauthorized use of your telephone line by another cordless telephone. Whenever you place the handset on the base unit, the unit will automatically select one of more than a million security codes.
18 | For Fax Advantage assistance, call |
