Panasonic KX-FPG377 Code #42 Setting the message alert, Code #43 Setting the recording time alert

8. Programmable Features

6.Press {SET}.

7.Press {MENU}.

Code #42: Setting the message alert

MESSAGE ALERT

MODE=OFF [±]

To alert you with beeps when a new voice message is recorded. If you hear slow beeps, listen to recorded messages. The beeps will stop.

“ON”: You will hear a beeping sound.

“OFF” (default): Deactivates this feature.

Code #43: Setting the recording time alert

REC. TIME ALERT

MODE=OFF [±]

To alert you with beeps when there is less than 60 seconds of remaining recording time. If you hear slow beeps, erase the recorded messages (page 52, 53). The beeps will stop.

“ON”: You will hear a beeping sound.

“OFF” (default): Deactivates this feature.

Code #44: Setting the memory reception alert

RECEIVE ALERT

MODE=ON [±]

To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.

The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.

“ON” (default): You will hear a beeping sound.

“OFF”: Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

MODE=ON [±]

To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). “ON” (default): You do not have to press {FAX/START} for fax reception.

“OFF”: You have to press {FAX/START} for fax reception.

Code #47: Setting the fax voice guidance

FAX GUIDANCE

MODE=ON [±]

If you wish to hear voice guidance for fax transmission/reception, activate this feature. “ON” (default): You will hear voice guidance. “OFF”: Deactivates this feature.

“ERROR”: To hear voice guidance only when fax transmission/reception fails.

Code #51: Setting the mailbox 1 password

BOX1 PASSWORD

ID=

To prevent other users from retrieving your messages, program a password for mailbox 1.

1.Press {MENU}.

2.Press {#}, then {5}{1}.

3.Enter a 3-digit number except a number using digits 0 or 7.

L The default ID is “555”.

4.Press {SET}.

5.Press {MENU}.

Code #52: Setting the mailbox 2 password

BOX2 PASSWORD

ID=

To prevent other users from retrieving your messages, program a password for mailbox 2.

1.Press {MENU}.

2.Press {#}, then {5}{2}.

3.Enter a 3-digit number except a number using digits 0 or 7.

L The default ID is “555”.

4.Press {SET}.

5.Press {MENU}.

Code #54: Changing the recording time for your TAM/FAX greeting message

GREETING TIME

MODE=16s [±]

“16s” (default): Maximum recording time is 16 seconds.

“60s”: Maximum recording time is 60 seconds. See page 51 for details.

Code #55: Greeting message for mailbox 1

BOX1 GREETING

CHECK [±]

See page 56 for details.

Code #56: Greeting message for mailbox 2

BOX2 GREETING

CHECK [±]

See page 56 for details.

Code #60: Setting the message transfer

MESSAGE TRANSFER

MODE=OFF [±]

63