Panasonic KX-TG2970 Programmable Settings Date and Time Base Unit, Telephone, Date and time

Programmable Settings

Date and Time Base Unit

We recommend you set the date and time so that the unit will announce the day and time each message was recorded when you play back messages.

1Press [FUNCTION/EDIT].

2	Press [ ] at “Telephone”.
		Telephone
3	Scroll to “Date and time” by pressing [ ]
		Date and time
	or [ ], then press [ ].
4	(1) Enter 2 digits each for the month, day and
		Date:	12	2.31.2004
	year. (Ex. To set May 15, 2004, enter “05	Time:12:00 AM
	15 04”.)	0-9=Date&Time
	(2) Enter 4 digits for the time (hour and	=AM/PM			=Save
	minute). (Ex. To set 9:30, enter “0930”.)	Date:05.15.2004
		Time:09:30
					AM
	• If you enter a wrong number, press [ ] or [ ] to	0-9=Date&Time
	move the cursor to the incorrect number. Enter	=AM/PM			=Save

the correct number.

5Select “AM” or “PM” by pressing [].

6Press [] (Save).

•If a long beep sounds, the setting is not correct. Start again from step 4.

•The clock starts working.

7Press [STOP].

•When entering the time, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, and select “PM”.)

The date and time may be incorrect after a power failure. When “ ” flashes on the base unit display, set the date and time again.

For Caller ID service users (p. 33)

• When a call is received, Caller ID information adjusts the date and time if the time is incorrect.

• Caller ID information will automatically adjust the date and time for daylight saving time.

• If the date and time have not been previously set, Caller ID information will not adjust the date and time.

18