The included cordless handset is pre-registered at the factory and assigned the extension number 1. You do not need to register this handset which has “[1]” on the display. If you purchase accessory cordless handsets, you must register each to the base unit. Only one cordless handset can be registered at a time. A cordless handset will be assigned the extension number at registration. The model number of the accessory cordless handset is KX-TGA290. To order, contact your dealer or call 1-800-211-PANA(7262) to locate a dealer.
Charge the battery fully. Make sure the base unit and the other cordless handsets are not being used.
The cordless handset display shows the instructions Press MUTE on
as shown on the right.base unit, then OK on handset to register handset
O K

Registration for Additional Handsets Base Unit & Handset

KX-TG2970 includes a base unit and one cordless handset. You can expand the system by adding up to 2 additional cordless handsets, sold separately. A maximum of 3 cordless handsets can be registered to the base unit.

Generally a maximum of 3 extensions excluding or including the base unit can operate at a time. If 3 other extensions are in use, such as conducting a call, you may not be able to use your unit. “System is busy. Please try again later.” will be displayed when you try to operate your unit. The maximum operating number may decrease, depending on the state of usage, such as using the Clarity Booster feature (p. 31), or when the Answering System is taking a call.

Preparation

KX-TG2970

KX-TGA290

Up to 2 accessory handsets can be added.

1Base unit: Press [MUTE].

The MUTE indicator flashes. After the MUTE indicator starts flashing, the rest of the procedure must be completed within 1 minute.

2Cordless handset:

(1)Press the soft key ( OK ).

(2)Wait until 3 beeps sound and the display shows the new extension number.

• Registration is complete.

Ex. Extension number 2

IN USE SP

[2]

Handset [2]

 

Registered

 

The registered number “[1]” to “[3]” is shown on the top right of the display.

You can stop registration by pressing [OFF] on the cordless handset and pressing [MUTE] on the base unit.

To re-register a cordless handset to a different base unit of the same model, see pages 68 and 69.

For assistance, please call: 1-800-ADT-ASAP

27

Page 27
Image 27
Panasonic KX-TG2970 operating instructions Registration for Additional Handsets Base Unit & Handset