Remote Operation from a Touch Tone Phone

Direct Remote Operation

Once you have entered the remote code (p. 62), you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up at anytime.

Direct commands

[4]: Plays back new messages.

[5]: Plays back all messages.

[1]: Repeats the current message.

If pressed within the first 5 seconds of playback, the previous message will be played.

[2]: Skips the current message.

[9]: Stops the current operation.

To resume operation, enter a direct command within 15 seconds, or the voice menu will start (p. 63).

[] [4]: Erases the current

message.

A beep will sound and the next message will be played.

[] [5]: Erases all messages.

A long beep will sound, and “No messages” will be heard.

[0]: Turns off the Answering System.

The unit hangs up.

Turning on the Answering System

Call your unit and wait for 12 rings.

The unit will answer and the greeting will be played.

The Answering System will turn on. Hang up or enter the remote code for other options.

When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options.

Skipping the greeting

After calling your unit, press [] during the greeting.

The unit skips the rest of the greeting and you can start recording your message after the long beep.

64

Page 64
Image 64
Panasonic KX-TG2970 operating instructions Direct commands, Turning on the Answering System, Skipping the greeting