Panasonic KX-TG2970 Displays, Base unit Cordless handset, Backlit LCD displays

Displays

Base unit Cordless handset

12:00AM DEC.31			2 63	7 8
		D	Received calls		4	Preparation
A Received calls			IN USE SP	[1]
			01
IN USE	MESSAGES	E	ADT PANIC	PLAY	9
B	C

AWhen “ ” flashes, the clock needs setting (p. 18).

B2“ IN USE ” functions as follows.

Off (invisible)	The line is free.
On	The line is being used.
Flashing	A call is on hold on the cordless handset or base unit, or
	the Answering System is answering a call (p. 54).
Flashing quickly	A call is being received.

C3“” is displayed when storing, viewing, copying or receiving the phone book items (p. 40–45).

D4The display shows the dialed number, call status, programming options, phone book items, Caller ID information etc. The time and date are displayed on the base unit. “ ” (extension icon) is displayed with the extension numbers

(ex. base unit=“0”, cordless handset 1= “1”) during an intercom call (p. 46) or a conference call (p. 50).

E“ MESSAGES ” will flash if there is at least one new message (p. 56). If there are only old messages, “ MESSAGES ” will not flash but remain lit. If there are no messages, “ MESSAGES ” will not be displayed.

6“SP” is shown when you are using the cordless handset speaker a) during an intercom call (p. 46) or a conference call (p. 50); b) while listening to messages (p. 57).

7The battery icon indicates the battery strength (p. 12).

8The extension number of your cordless handset is displayed if it has been registered to the base unit (p. 27, 69).

9The prompts on the bottom line will show corresponding functions of the soft keys which are located directly below the display (p. 8).

Ex. The soft key below “ PLAY ” will function as PLAY key.

Backlit LCD displays

The display of the cordless handset will light for a few seconds after pressing a button or lifting the cordless handset off the charger.

The base unit display will light during use.

For assistance, please call: 1-800-ADT-ASAP

9