Setting the unit before use, Display language | Panasonic KX-TS4100

Preparation

Setting the unit before use

Display language

Choose whether the display appears in English or Spanish. The default setting is

“English”.

Important:

L Make sure that the unit is in standby mode.

1Press {MENU/SET}.

2Select “Phone Setup”, then press

{MENU/SET}.

3Select “Language”, then press

{MENU/SET}.

➔Language Extension No. Date & Time

[V/^]:Scroll

4Select the desired setting, then press

{MENU/SET}.

Language =English [SET]:Save [V/^]:Change

5Press and hold {MENU/SET} to return to standby mode.

Note:

L To return to the previous menu, press

{<}.

L If you select a language you cannot read, press {MENU/SET} 2 times, press {V}, press {MENU/SET}, select the desired language, then press

{MENU/SET}.

Extension No.

Assign the extension number (“11” to “26”) to the unit to use the intercom feature. The default setting is “11”.

Important:

L Make sure that the unit is in standby mode.

1Press {MENU/SET}.

2Select “Phone Setup”, then press

{MENU/SET}.

3Select “Extension No.”, then press {MENU/SET}.

➔Extension No. Date & Time Auto Mute

[V/^]:Scroll

4Select the desired number, then press {MENU/SET}.

Extension No. =11 [SET]:Save [V/^]:Change

If you try to assign an extension number which is already used: The display shows “(In Use)”.

Extension No.

=11 (In Use)

Please Re-Assign

Another EXT#

Press {V} or {^} to select a different extension number, then press

{MENU/SET}.

5Press and hold {MENU/SET} to return to standby mode.

Note:

L To return to the previous menu, press

{<}.

L If you are going to add another station to your existing telephone system, assign a different extension number.

For assistance, please visit http://www.panasonic.com/phonehelp

23

Image 23

Panasonic KX-TS4100 operating instructions Setting the unit before use, Display language, Extension No

Contents

Operating Instructions Introduction Index Thank you for purchasing a Panasonic integrated telephone Introduction Accessory item Order number Accessory informationIncluded accessories Additional/replacement accessories Installation Important safety instructions Battery Use caution when installing or modifying telephone lines Routine care For best performanceEnvironment Example Unit Symbols used in these operating instructionsSymbol Meaning Button name Display Navigator key Mute indicator SP-PHONESpeakerphone SP-PHONE indicatorHeadset indicator Location of controls Memory card Headset jack DND Do Not Disturb Volume key + DND indicatorIntercom indicator MIC Microphone Battery life Battery installationBattery replacement On the wall Setup Connecting the handset and AC adaptor Connecting the units to individual two-line telephone jacks Connecting the telephone line cords Connecting 2 two-line telephone jacks Connecting four single-line telephone jacks If you subscribe to a DSL service Connecting four single-line telephone jacks Setting up the line group Example Connecting a communication device Extension No Setting the unit before useDisplay language MENU/SET. Example Dialing modeDate and time MENU/SET. Example August Making calls Using the handsetUsing the speakerphone Switching from speakerphone to handset Turning ringer on/off Answering calls Turning Do Not Disturb DND on/off Ringer type Hold button Useful features during a callCall privacy Flash button For Call Waiting service usersHold reminder Mute button Flash Time =600 ms SETSave V/Change Temporary tone dialing for rotary/pulse service usersFlash Time Hold Reminder Handsfree Mode Scroll Flash time Adding/editing names and phone numbers Speed dialerSpeed dial preference Editing/correcting a mistake Storing items from the redial list into the speed dialerFLASH, REDIAL/PAUSE or Character table Key 3215555 Select SPD Key Erasing a stored entry If speed dial preference is set to Preview Memory Calling someone with the speed dialerIf speed dial preference is set to If speed dial preference is set to Intercom DSS SP-PHONE or Intercom Intercom/PagingMaking an intercom call Answering an intercom call Answering all pages Paging a designated extensionAnswering a single Paging all extensions Paging before transfer Transferring callsRoom monitor Mute Hold Conference callsAnswering transferred calls Answering a transferred call directed to another extension Conference with an outside call and an intercom call Sub-menu Setting Programmable settings Advanced Setup Prime line Programming the phone setup featuresHandsfree mode Line group Programming the advanced setup featuresReset all Headset optional Connecting the optional headset to the unit Locks, so the tab holds the handset Wall mounting Useful Information Connecting a standard telephone Display message Cause/solution Error messages General use Problem Cause/solution Troubleshooting Making/answering calls, intercom Programmable settings Problem Cause/solutionProblem Cause/solution REN FCC and other information Useful Information Specifications Customer services Warranty Limited Warranty Limits And Exclusions Index Page Page Copyright Panasonic Puerto Rico, Inc