Panasonic KX-TS4100 Transferring calls, Room monitor, Mute, Blind transfer, Multi-unit Operation

Models: KX-TS4100

1 60
Download 60 pages 45.07 Kb
Page 37
Image 37
Room monitor

Multi-unit Operation

Room monitor

You can monitor a room using the intercom feature. For example, you can monitor a baby from different areas of the house.

To use this feature, turn auto mute off at the destination extension.

Important:

L Turn auto mute off at the destination extension (see “Turning auto mute on/ off ” on page 36).

L Make sure that the destination unit is in standby mode.

1Press {INTERCOM} 2 times.

L The INTERCOM indicator lights. L The SP-PHONE indicator lights and the speakerphone turns on.

2Press the speed dial (extension) button or enter the extension number.

L The destination extension does not ring, instead it will beep 3 times.

L Your unit starts to monitor the room through the extension.

L If necessary, you can mute your sound output by pressing

{MUTE}.

3To end monitoring, press

{SP-PHONE} or place the handset on the cradle.

Note:

L To avoid being monitored and keep privacy, turn Do Not Disturb (DND) on.

L The monitored extension user can stop being monitored by pressing

{SP-PHONE} or {INTERCOM}.

Transferring calls

You can transfer an outside call to another extension.

The speed dial (extension) buttons “1, 2, 3...15, 16” mean the extension numbers “11, 12, 13...25, 26”.

Blind transfer

1During an outside call, press

{TRANSFER} to put the call on hold.

2Press the speed dial (extension) button or enter the extension number, then place the handset on the cradle.

L If the transferred extension does not answer within 1 minute, the transferred call will ring at all extensions.

Note:

L Any extensions can take a transferred call by pressing the relevant line button.

L If a call is kept on hold for more than 60 or 120 seconds, an alarm tone starts to sound (hold reminder). To turn off the hold reminder, see “Hold reminder” on page 29.

L If a call is kept on hold for more than 5 minutes, the call is disconnected.

Paging before transfer

1During an outside call, press

{INTERCOM} 2 times to put the call on hold.

L You can make an intercom call by pressing {INTERCOM}.

2Press the speed dial (extension) button or enter the extension number.

L If the paged extension does not answer, press the relevant line button.

For assistance, please visit http://www.panasonic.com/phonehelp

37

Page 37
Image 37
Panasonic KX-TS4100 Transferring calls, Room monitor, Mute, Blind transfer, Paging before transfer, Multi-unit Operation