Making/Answering Calls
Flash time
The flash time depends on your telephone exchange or host PBX. You can select the following flash time: 80
ms, 100 ms, 200 ms, 300 ms, 400 ms,
500ms, 600 ms, and 700 ms. The default setting is “600 ms”.
Important:
LMake sure that the unit is in standby mode.
1Press {MENU/SET}.
2Select “Phone Setup”, then press
{MENU/SET}.
3Select “Flash Time”, then press
{MENU/SET}.
➔Flash Time Hold Reminder Handsfree Mode
[V/^]:Scroll
4Select the desired setting, then press
{MENU/SET}.
Flash Time =600 ms [SET]:Save [V/^]:Change
5Press and hold {MENU/SET} to return to standby mode.
Note:
LTo return to the previous menu, press
{<}.
LIf you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc.). Consult your PBX installer for the correct setting.
Temporary tone dialing (for rotary/pulse service users)
You can temporarily switch the dialing mode to tone when you need to access touch tone services (for example, answering services, telephone banking services, etc.).
Press {*} (TONE) before entering access numbers which require tone dialing.
30For assistance, please visit http://www.panasonic.com/phonehelp
