Programming the advanced setup features | Panasonic KX-TS4100

Programming

Programming the advanced setup features

Line group

You can choose to leave LINE4 unconnected at particular extensions or to connect private lines (constructing a line group) at particular extensions.

To set up the line group, see “Setting up the line group” on page 20.

Important:

L Make sure that the unit is in standby mode.

1Press {MENU/SET}.

2Select “Advanced Setup”, then press {MENU/SET}.

3Select “Line Group”, then press

{MENU/SET}.

➔Line Group

Reset All Ringer On/Off

[V/^]:Scroll

4Select the desired setting, then press

{MENU/SET}.

Line Group =Line 04 [SET]:Save [V/^]:Change

5Press and hold {MENU/SET} to return to standby mode.

Note:

L To return to the previous menu, press

{<}.

L Transferring a call to a different line group through line 4 is not allowed.

Reset all

Return all features to default settings, and all numbers set to speed dial are erased. You cannot undo the “Reset All” command.

Important:

L Make sure that the unit is in standby mode.

1Press {MENU/SET}.

2Select “Advanced Setup”, then press {MENU/SET}.

3Select “Reset All”, then press

{MENU/SET}.

➔Reset All Ringer On/Off Ringer Type

[V/^]:Scroll

4Select “Yes?”, then press

{MENU/SET}.

Reset All Yes? [SET]:Reset [V/^]:Change

L To cancel, select “No?”, then press

{MENU/SET}.

5Press and hold {MENU/SET} to return to standby mode.

Note:

L To return to the previous menu, press {<}.

For assistance, please visit http://www.panasonic.com/phonehelp

43

Image 43

Panasonic KX-TS4100 operating instructions Programming the advanced setup features, Line group, Reset all

Contents

Operating Instructions Introduction Index Thank you for purchasing a Panasonic integrated telephone Introduction Accessory item Order number Accessory informationIncluded accessories Additional/replacement accessories Installation Important safety instructions Battery Use caution when installing or modifying telephone lines Environment For best performanceRoutine care Example Unit Symbols used in these operating instructionsSymbol Meaning Button name Display Navigator key Mute indicator SP-PHONESpeakerphone SP-PHONE indicatorHeadset indicator Location of controls Memory card Headset jack DND Do Not Disturb Volume key + DND indicatorIntercom indicator MIC Microphone Battery replacement Battery installationBattery life On the wall Setup Connecting the handset and AC adaptor Connecting the units to individual two-line telephone jacks Connecting the telephone line cords Connecting 2 two-line telephone jacks Connecting four single-line telephone jacks If you subscribe to a DSL service Connecting four single-line telephone jacks Setting up the line group Example Connecting a communication device Display language Setting the unit before useExtension No MENU/SET. Example Dialing modeDate and time MENU/SET. Example August Making calls Using the handsetUsing the speakerphone Switching from speakerphone to handset Turning ringer on/off Answering calls Turning Do Not Disturb DND on/off Ringer type Call privacy Useful features during a callHold button Flash button For Call Waiting service usersHold reminder Mute button Flash Time =600 ms SETSave V/Change Temporary tone dialing for rotary/pulse service usersFlash Time Hold Reminder Handsfree Mode Scroll Flash time Speed dial preference Speed dialerAdding/editing names and phone numbers Editing/correcting a mistake Storing items from the redial list into the speed dialerFLASH, REDIAL/PAUSE or Character table Key 3215555 Select SPD Key Erasing a stored entry If speed dial preference is set to Preview Memory Calling someone with the speed dialerIf speed dial preference is set to If speed dial preference is set to Intercom DSS SP-PHONE or Intercom Intercom/PagingMaking an intercom call Answering an intercom call Answering all pages Paging a designated extensionAnswering a single Paging all extensions Paging before transfer Transferring callsRoom monitor Mute Hold Conference callsAnswering transferred calls Answering a transferred call directed to another extension Conference with an outside call and an intercom call Sub-menu Setting Programmable settings Advanced Setup Handsfree mode Programming the phone setup featuresPrime line Reset all Programming the advanced setup featuresLine group Headset optional Connecting the optional headset to the unit Locks, so the tab holds the handset Wall mounting Useful Information Connecting a standard telephone Display message Cause/solution Error messages General use Problem Cause/solution Troubleshooting Problem Cause/solution Programmable settings Problem Cause/solutionMaking/answering calls, intercom REN FCC and other information Useful Information Specifications Customer services Warranty Limited Warranty Limits And Exclusions Index Page Page Copyright Panasonic Puerto Rico, Inc