Programmable settings Problem Cause/solution | Panasonic KX-TS4100

Useful Information

Programmable settings

Problem	Cause/solution
You cannot program	L Programming is not possible while in the talk or intercom
function items, such	mode.
as the dialing mode.	L Do not pause for over 30 seconds while programming.
	L Make sure that the unit is in standby mode.


Making/answering calls, intercom

Problem	Cause/solution
Static is heard, sound	L If your unit is connected to a telephone line with DSL
cuts in and out.	service, we recommend connecting a noise filter between
	the unit and the telephone line jack (see “Connecting 2
	two-line telephone jacks” on page 18, “Connecting four
	single-line telephone jacks” on page 19). Contact your
	DSL provider for details.

You cannot redial the	L If the last number dialed was more than 32 digits long, the
last number dialed.	number cannot be redialed.
	L Access numbers entered after pressing {*} (TONE) will
	not be included when redialing.

You cannot have a	L Make sure that {HEADSET} is pressed.
conversation using	L Make sure that the headset is plugged into the headset
the headset.	jack properly (see “Connecting the optional headset to the
	unit” on page 44).

During a power	L Make sure that a battery has been installed properly (see
failure, you cannot	“Battery installation” on page 12).
make or answer a	L The battery may have been discharged. In that case,
call.	replace the battery with a new one (see “Battery
	replacement” on page 12).

The intercom does not	L DSL Internet connection and KX-TS4100/KX-TS4200/
work.	KX-TS4300 Intercom work at similar frequencies. Please
	contact Panasonic at 1-800-211-PANA (1-800-211-7262)
	for special wiring configurations.

You cannot page	L The unit is in use. Try again later.
other extension.
Youcannotanswerthe	L The transferred call was disconnected before you
transferred call even	answered it.
if the display shows
“Transfer From
xx”.

50For assistance, please visit http://www.panasonic.com/phonehelp

Image 50

Panasonic KX-TS4100 operating instructions Programmable settings Problem Cause/solution, Making/answering calls, intercom

Contents

Operating Instructions Introduction Index Introduction Thank you for purchasing a Panasonic integrated telephone Additional/replacement accessories Accessory informationIncluded accessories Accessory item Order number Important safety instructions Installation Use caution when installing or modifying telephone lines Battery Routine care For best performanceEnvironment Display Symbols used in these operating instructionsSymbol Meaning Button name Example Unit Location of controls Mute indicator SP-PHONESpeakerphone SP-PHONE indicatorHeadset indicator Navigator key MIC Microphone Headset jack DND Do Not Disturb Volume key + DND indicatorIntercom indicator Memory card Battery life Battery installationBattery replacement Setup On the wall Connecting the handset and AC adaptor Connecting the telephone line cords Connecting the units to individual two-line telephone jacks Connecting 2 two-line telephone jacks Connecting four single-line telephone jacks If you subscribe to a DSL service Connecting four single-line telephone jacks Setting up the line group Example Connecting a communication device Extension No Setting the unit before useDisplay language MENU/SET. Example August Dialing modeDate and time MENU/SET. Example Switching from speakerphone to handset Using the handsetUsing the speakerphone Making calls Answering calls Turning ringer on/off Ringer type Turning Do Not Disturb DND on/off Hold button Useful features during a callCall privacy Mute button For Call Waiting service usersHold reminder Flash button Flash time Temporary tone dialing for rotary/pulse service usersFlash Time Hold Reminder Handsfree Mode Scroll Flash Time =600 ms SETSave V/Change Adding/editing names and phone numbers Speed dialerSpeed dial preference Character table Key Storing items from the redial list into the speed dialerFLASH, REDIAL/PAUSE or Editing/correcting a mistake Erasing a stored entry 3215555 Select SPD Key If speed dial preference is set to Intercom DSS Calling someone with the speed dialerIf speed dial preference is set to If speed dial preference is set to Preview Memory Answering an intercom call Intercom/PagingMaking an intercom call SP-PHONE or Intercom Paging all extensions Paging a designated extensionAnswering a single Answering all pages Mute Transferring callsRoom monitor Paging before transfer Answering a transferred call directed to another extension Conference callsAnswering transferred calls Hold Conference with an outside call and an intercom call Programmable settings Sub-menu Setting Advanced Setup Prime line Programming the phone setup featuresHandsfree mode Line group Programming the advanced setup featuresReset all Connecting the optional headset to the unit Headset optional Wall mounting Locks, so the tab holds the handset Useful Information Connecting a standard telephone Error messages Display message Cause/solution Troubleshooting General use Problem Cause/solution Making/answering calls, intercom Programmable settings Problem Cause/solutionProblem Cause/solution FCC and other information REN Useful Information Specifications Customer services Warranty Limited Warranty Limits And Exclusions Index Page Page Panasonic Puerto Rico, Inc Copyright