Projection
|
| AUTO |
|
| SETUP |
RGB 1 | RGB 2 | AUX |
VIDEO | SHUTTER | |
MENU | LENS | ENTER |
|
ON POWER OFF
|
| AUTO |
|
| SETUP |
RGB | RGB | AUX |
1 | 2 | |
|
| SHUTTER |
VIDEO | SHUT |
MENU FREEZE
PAGE UP
ENTER
PAGE DOWN
ON SCREEN
1 STD 2 OSD 3 SYSTEMSEL
|
| D.ZOOM | ||
4 | FUNC | 5 | 6 | |
1 | ||||
|
| BRIGHT | CONTRAST | |
7 LENS | 8 | 9 | ||
| NEXT | ASPECT | 0 USER | |
| LIGHT | ID ALL | ID SET | |
Computer | LASER ON/OFF | |||
Projector | ||||
| Numetric | |||
Powering off the projector
Press the POWER OFF “
” button.
Select “EXECUTE” with 
or 
button and press the ENTER button.
(or press the POWER OFF “
” button again.)
A message “UNDER SHUTDOWN 20 SECONDS” appears and the projection of the image stops when the count turns to zero.
(The power indicator lamp of the main unit turns to orange. The cooling fan keeps running still after the projection stopped.)
Wait until the power indicator lamp of the main unit turns to red (i.e., until the cooling fan stops).
While the cooling fan is still running, never turn off the MAIN POWER switch, nor unplug the projector from the outlet.
Press the “O” marked side of the MAIN POWER switch to remove all power from the projector.
Note
•Turning on the power supply will not light up the light source lamp if the lamp is in the process of cooling down after turning off the power supply. To light up the lamp, turn on the power supply again when the lamp has been cooled sufficiently.
•The projector consumes approximately 12 watts of power even in standby mode after the cooling fan stops. (Power indicator lamp lit in red)
•If you
40
