System information
Displays the system information of the projector.
SYSTEM INFORMATION
ROM VERSION: | 1.00 |
SET RUNTIME: | 14h |
LAMP1 RUNTIME: | 13h |
LAMP2 RUNTIME: | 13h |
INPUT BOARD: | NOT YET |
NUMBER OF |
|
ENTRY SIGNAL: | 4/96 |
ENTER: NEXT
•Pressing the “ENTER” button will move on to the next page.
SYSTEM INFORMATION
ROM VERSION: | 1.00 |
ON COUNT |
|
POWER ON TIMES: | 55 |
LAMP 1 ON: | 57( 0) |
LAMP 2 ON: | 59( 0) |
AUX: | NOT YET |
NUMBER OF |
|
ENTRY SIGNAL: | 4/96 |
ENTER: NEXT
Video setting
This feature allows the user to select the signaling system according to the connected device.
Select “VIDEO SETTING” from the “OPTION” screen and press the ENTER button.
The “VIDEO SYSTEM” screen will be displayed.
Use the 
buttons to select “AUTO 1” or “AUTO 2”.
Note • When
appear on the “VIDEO SETTING” screen allowing the used to select either “LINE or Y/C” or “YCbCr”.
VIDEO SYSTEM | AUTO 1 | ||
|
|
|
|
|
|
|
|
| AUTO 2 | ||
“AUTO1”: The system is automatically selected from among NTSC, PAL, SECAM, NTSC4.43 and PAL60.
“AUTO2”: The system is automatically selected from among NTSC,
Fan control
When using the projector over 1 400 m (4605.3') above sea level, set to “High”.
FAN CONTROL | NORMAL | ||
|
|
|
|
|
|
|
|
HIGH
Automatic adjustment
(Only for RGB input)
Use this setting when adjusting a specific or oblong (16:9, etc.) signal.
Press the MENU button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the buttons.
Press the ENTER button.
The OPTION screen will be displayed.
Using the 
buttons, select “AUTO SETUP”.
Press the 
buttons.
The AUTO SETUP screen will be displayed.
Using the 
buttons, switch to the desired mode.
“STANDARD”: to receive signals of which image aspect is 4:3 or 5:4
“WIDE”:to receive signals of which image aspect is 16:9 (oblong)
“USER”:to receive signals of specific horizontal resolution (number of horizontally displayed dots)
|
|
|
|
|
|
| MODE |
|
| Applicable resolution |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 640 x 400, 640 x 480, 800 x 600, 832 x | |||
| STANDARD |
|
| 624, 960 x 720, 1 024 x 768, 1 152 x 864, |
|
|
|
| 1 152 x 870, 1 280 x 960, 1 280 x 1 024, |
| |
|
|
|
| 1 600 x 1 200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| WIDE |
|
| 720 x 400, 848 x 480, 1 280 x 720, |
|
|
|
| 1 120 x 750, 1 376 x 768, 1 600 x 1 024 |
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
If “USER” is selected, enter the horizontal resolution of signal source into “number of horizontally displayed
dots” using 
buttons. 
Press the ENTER button.
Execute automatic adjustment.
A message “EXECUTING...” appears during automatic adjustment.
When the adjustment is complete, the system returns to the input screen.
73
